Energy & Utilities Nameplates
Instrument, generation, and field equipment
Identification for meters, gauges, pumps, generation equipment, and mobile field assets, each tied to its own controlled equipment record. UL approved label constructions and etched metal plates for outdoor and service-exposed installations.
U.S. Nameplate Co. has the capability and experience to manufacture products that withstand the most extreme weather conditions. Companies in the energy industry — oil, gas, fluid power, nuclear power, wind energy, and coal — rely on us as their preferred supplier, and utility companies across the globe trust us to manufacture industry-specific labels, nameplates, and signs to their specifications.
Energy and utility equipment we identify
Energy customers manufacture flow meters and accessories, pumps, fuel tank gauges and leak detection systems, generators, and much more. Utility original equipment manufacturers build boom trucks, cranes, lifts, and water and gas meters.
-
Flow meters, gauges, and measurement accessories
-
Pumps, compressors, and fluid power equipment
-
Fuel tank gauges and leak detection systems
-
Generators and power generation equipment
-
Boom trucks, cranes, and aerial lifts
-
Water and gas meters
-
Switchgear, transformers, and distribution equipment
Products commonly used in the utilities industry include control panels, safety labels, nameplates, and metal signs.
Regulated identification
This sector carries more regulated identification than most. A rating plate on a pressure vessel, a meter, or a generator is not decoration — it is the record an inspector, an installer, or a utility technician works from, often years after installation and often outdoors in poor light.
Which sets the standard unusually high on one specific axis: the information has to remain readable for the service life of the asset, because an unreadable rating plate can take equipment out of service regardless of whether the equipment still works.
Service conditions
Permanent outdoor exposure
Meters, switchgear, and distribution equipment live outdoors for decades with no shelter and no cleaning.
Extreme weather
Equipment is specified to work through the weather extremes of the region it serves, and the identification has to match that rating.
Chemical and hydrocarbon contact
Fuel, oil, and process chemicals attack marking that sits on the surface of a plate.
Wide temperature variance
Around generation and fluid power, surface temperatures stress both adhesives and ink films.
Safety-critical content
Arc flash, pressure, and isolation information has to stay legible precisely because it is only read when something is wrong.
Materials and processes
Our labels provide durable indoor and outdoor brand identity, and materials that withstand harsh or extreme temperature variances.
Anodized aluminum
Sapphire-hard surface, insulative and static resistant, roughly 20-year exterior life.
Stainless steel
2B mill finish, the preferred choice for caustic and acidic environments around processing.
Metalphoto®Sub-surface photographic imaging, fire, abrasion, and corrosion resistant, and UL recognized. See
Metalphoto processing.
Metal etchingRecessed, color-filled legends with high chemical resistance — the usual specification for permanently outdoor plates. See
metal etching.
Brass
Non-sparking and UV coated, which matters in some plant environments.
EmbossingRaised characters that stay legible after decades of exposure. See
embossing and forming.
Identification components
Rating and data platesElectrical values, pressures, capacities, and operating limits, frequently carrying an approval mark. See
rating plates.
Serial and asset platesTie an asset to its record across a distributed network of equipment. See
serial plates.
Control panelsOperator interfaces built for outdoor and plant conditions. See
aluminum control panels.
Safety labels and metal signsArc flash, pressure, and isolation identification. See
custom safety labels.
Component and valve tagsIdentification for the sub-assemblies inside a larger installation. See
data tags.
Trade shows and memberships
Our staff stay connected to the utilities industry by attending annual trade shows and keeping informed of industry trends. We exhibit at and attend CONEXPO-CON/AGG, and attend the PEI Show run by the Petroleum Equipment Institute.
How an energy and utilities order runs
- 1
Tell us the equipment and the exposure. Including any approval mark the plate must carry. Our seasoned art department turns a blueprint or artwork into a press-ready proof at no charge.
- 2
We recommend the construction. Material and marking method chosen against weather, chemical contact, and required service life.
- 3
You approve the proof. Including the placement of approval marks and any variable data.
- 4
Production. Most jobs finish 7–10 days after the proof is approved, in an ISO 9001:2015 certified facility. Rush work runs 3–5 business days for an additional fee.
- 5
Repeat supply. Parts can run against a stocking program so releases arrive when the line needs them.
Energy and utilities RFQ checklist
-
The equipment, and where the identification mounts
-
Drawings or artwork, with plate sizes and hole positions
-
Any approval mark or standard the plate must carry
-
The exposure: permanent outdoor, chemical, temperature range
-
How long the information must stay readable
-
Whether values change between units, and how they reach us
-
Quantity and your timing, including the date the line actually needs parts
If you do not have all of that yet, send what you have and call 319-895-8804. Customer service is open 8:00 AM–4:30 PM CST Monday through Thursday and 7:00 AM–3:30 PM CST Friday, and you will always reach someone in person.
Since 1946
Family-owned and operated in Mount Vernon, Iowa
3,000+
OEMs supplied across the U.S. and abroad
25 years
Outdoor exposure, some products guaranteed longer
7–10 days
Typical production after proof approval
$0
Tooling fee on in-house equipment
Why U.S. Nameplate Co.
Why energy & utilities manufacturers choose U.S. Nameplate Co.
One partner, one roof
Metal identification and flexible labels are produced under one roof in Mount Vernon, Iowa, so a single supplier covers plates, tags, overlays, decals, and safety labels instead of three.
No tooling fee on in-house equipment
U.S. Nameplate Co. does not charge a tooling fee for any in-house equipment. A one-time charge applies only when a tool has to be created for your order.
You reach a person
Customer service representatives are available 8:00 AM–4:30 PM CST Monday through Thursday and 7:00 AM–3:30 PM CST Friday. You will always reach someone in person.
Built to outlast the equipment
Metal nameplates are built to withstand up to 25 years of outdoor exposure, with some products guaranteed for 25 years or more. Safety labels are UL authorized and OSHA compliant, produced in an ISO 9001:2015 certified facility.
Family-owned since 1946
Supplier of choice to more than 3,000 original equipment manufacturers in the U.S. and abroad, with team members averaging 10+ years of service.
One piece or one million
The 55,000 sq ft climate-controlled facility is equipped to handle orders from a single plate to production volumes, on repeat release schedules.
Request a quote for energy & utilities nameplates and labels
We offer free quotes on all energy & utilities identification orders. Send the drawing, artwork, quantities, application, and timing you have today — our art department turns a blueprint into a press-ready proof, and we will tell you what is still open.
Most jobs finish 7–10 days after the proof is approved. Rush orders can be produced in 3–5 business days for an additional fee. Orders ship within a 10% over/under quantity standard.
Request a Quote or call 319-895-8804 and you will reach someone in person.
